Product Name: Laboratory Refrigerator
Model
No: ML150

Refrigerator for preserving sensitive products used
by laboratories
This refrigerator has been designed in response to the precise requirements
of medical analysis for preserving temperature-sensitive products such as
samples, reagents and serums.
The
latest generation of equipment moreover complies with the SILVER and GOLD safety
standard. 85-95 mm thick insulation with K less than or equal to 0.35W /m2.K
guarantees low energy consumption. The very thick lockable outer door opens
through 900, the door closes automatically.
All setting and monitoring functions are grouped on the control panel equipped
with a digital display and touchpad. This latest generation refrigerator is
equipped with a single RS 485 interface enabling the refrigerator or freezer to
be connected to a computer. All the control and monitoring functions can
consequently be provided using a computer with special software.
The compressor is distinguished by its excellent performance, low noise level
(<60dB) and minimal vibration. The RILSAN shelves promote the circulation of
cold air inside the refrigerator. The electronic management system guarantees
that the preset temperature is constantly maintained. The operating temperature
can be set as required, as can the WARM and COLD alarm points. Two sensors
located inside the unit constantly record the temperature, which is displayed on
the control panel and transmitted to the electronic control system and graphic
temperature recorder respectively. Any temperature deviations are therefore
immediately detected.
The stainless steel interior provides optimal hygienic conditions and great
sturdiness. Access to the mechanical equipment is easy and allows convenient
cleaning.

Gross Storage Capacity: 153 litres
Material |
 |
 |
Cabinet Insulation (mm) |
35 bis 55 |
 |
 |
External Material |
Powder painted steel |
 |
 |
Internal Material |
PS (Polystyrol) |
 |
 |
Volumes |
 |
 |
Gross Volume |
153 l |
 |
 |
Net Volume |
127 l |
 |
 |
Outside
Dimensions |
 |
 |
Height x Width x Depth (mm) |
1080 x 595 x 600 |
 |
 |
Net Weight |
|
 |
 |
Inner
Dimensions |
 |
 |
Height x Width x Depth (mm) |
725 x 480 x 440 |
 |
 |
Ship
Dimensions with Ocean (wood) packing |
 |
 |
Height x Width x Depth (mm) |
1280 x 710 x 730 |
 |
 |
Gross Weight |
|
 |
 |
Temperature
Set Range |
 |
 |
Temp Set Point *(amb temp) |
+20C bis +80C |
 |
 |
Preset "Warm
Alarm" |
Set point +30C |
 |
 |
Preset "Cold
Alarm" |
Set point -30C |
 |
 |
* The amb. temperature must be always be 5K higher than the Set Point.
|